Ribben

Ribben – The fence post that combines function and protection!

Discover Ribben, the perfect fence post for patios and gardens. With a modern design and a tighter gap between the slats, Ribben offers an excellent privacy screen that creates a private outdoor environment.

The rib is designed for easy installation – use 34×45 mm impregnated timber and get a sturdy fence in no time. In addition, the fence post is maintenance-free, allowing you to enjoy a neat and well-maintained appearance without a long time.

A privacy screen on the patio is the perfect way to create a relaxing and private oasis in your garden. By reducing the visibility of neighbours and passers-by, you can enjoy your patio without feeling watched – whether you’re sunbathing, reading a book or inviting friends over for a cosy barbecue.

In addition to offering privacy, a privacy screen also serves as a stylish design element that frames your patio and creates a clear boundary with its surroundings. It can also help to reduce wind and provide a sense of security, especially if your patio is open or close to a road.

The number of studs varies depending on the pole height:

1000 mm 17 hole 34×45 mm
1500 mm 27 hole 34×45 mm
1800 mm 33 hole 34×45 mm

The distance between the ground and the first stud is 13.5 cm. The distance between the joists is 3mm (0.03cm). The holes are 36×47

Fence post
Remember to order the right post types for your purpose (middle posts, corner posts, end post right, end post left).

Post cap

The pole hat is available in black plastic or aluminium in any colour.

Fencefoot
Remember to order a post base for each post.

We recommend post base 120x120mm to reduce the risk of wind loading:

https://www.recalgarden.com/stolpfot/stolpfot-till-staketstolpe-platta-120x120mm/

Mounting screw

Don’t forget to order mounting screws for mounting wooden studs.

Montage
Buy any impregnated timber of 34×45 mm at your local builders’ merchant.
Here you will also find the wood Beijer

Make sure that the wood has not swelled too much (this makes assembly difficult), then you will also need the following tools:

– Tape measure
– Screwdriver with bit and drill bit
– Rubber mallet (for mounting the foot on the post)

Install the studs using the bracket on the back of the posts and always mount the fence so that it is stable – the recommendation is a maximum of 150 cm between the posts and that you always place the posts before screwing the timber to ensure that your order was correct.

Mounting principle